[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Capabilities] SMIv2 to XML Schema conversions
On Mon, Feb 20, 2006 at 09:12:12AM -0800, McDonald, Ira wrote:
> I hadn't realized that there _was_ a netconf model list.
> NetConf and IETF Languge Tag Registration Updates are
> accounting for 80 messages a day that I mostly try to read.
>
> The link you sent below appears to be broken (I can't
> use a command line FTP or a web browser to that site).
Seems to be a middlebox issue - some clients seem to work while
others don't.
> The translations of the two modules in Printer MIB v2
> (RFC 3805) from my tool are permanently posted at:
>
> ftp://ftp.pwg.org/pub/pwg/wims/schemas/rfc3805a-20040805.xsd
> - IANA-PRINTER-MIB (textual conventions registry)
>
> ftp://ftp.pwg.org/pub/pwg/wims/schemas/rfc3805b-20040805.xsd
> - Printer-MIB
>
> If you send me your translation as an attachment, I'll try
> to find time to look at it and compare. I'm very busy just
> now, so it may take a little while.
I am attaching it. Note that we tried to keep as much information as
possible and hence your translation appears much more verbose. (Some
people have used the translation in an SNMP/XML gateway where this
additional information was useful.)
> And since you make smidump available and you're the expert,
> it's probably the right choice for others to use.
I like to understand what proper mappings are. I am sure that are
differences in the details and I like to understand them and perhaps
improve upon what we have. I am not talking about implementations here
- I am interested to figure out whether there have been common ways to
do things or whether it is possible to agree on a common way to do
things. This is IMHO the first step in writing up a specification.
/js
--
Juergen Schoenwaelder International University Bremen
<http://www.eecs.iu-bremen.de/> P.O. Box 750 561, 28725 Bremen, Germany
<?xml version="1.0"?>
<!-- This module has been generated by smidump 0.4.3. Do not edit. -->
<!-- WARNING: files located at http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/ are subject to changes. -->
<xsd:schema targetNamespace="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/Printer-MIB"
xmlns="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/Printer-MIB"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:smi="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/smi"
xmlns:SNMPv2-SMI="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/SNMPv2-SMI"
xmlns:SNMPv2-TC="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/SNMPv2-TC"
xmlns:SNMPv2-CONF="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/SNMPv2-CONF"
xmlns:HOST-RESOURCES-MIB="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/HOST-RESOURCES-MIB"
xmlns:IF-MIB="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/IF-MIB"
xmlns:IANA-PRINTER-MIB="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/IANA-PRINTER-MIB"
xmlns:IANA-CHARSET-MIB="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/IANA-CHARSET-MIB"
xml:lang="en"
elementFormDefault="qualified"
attributeFormDefault="unqualified">
<xsd:annotation>
<xsd:documentation>
The MIB module for management of printers.
Copyright (C) The Internet Society (2004). This
version of this MIB module was published
in RFC 3805. For full legal notices see the RFC itself.
</xsd:documentation>
</xsd:annotation>
<xsd:import namespace="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/smi" schemaLocation="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/smi.xsd"/>
<xsd:import namespace="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/SNMPv2-SMI" schemaLocation="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/SNMPv2-SMI.xsd"/>
<xsd:import namespace="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/SNMPv2-TC" schemaLocation="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/SNMPv2-TC.xsd"/>
<xsd:import namespace="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/SNMPv2-CONF" schemaLocation="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/SNMPv2-CONF.xsd"/>
<xsd:import namespace="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/HOST-RESOURCES-MIB" schemaLocation="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/HOST-RESOURCES-MIB.xsd"/>
<xsd:import namespace="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/IF-MIB" schemaLocation="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/IF-MIB.xsd"/>
<xsd:import namespace="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/IANA-PRINTER-MIB" schemaLocation="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/IANA-PRINTER-MIB.xsd"/>
<xsd:import namespace="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/IANA-CHARSET-MIB" schemaLocation="http://www.ibr.cs.tu-bs.de/projects/libsmi/xsd/IANA-CHARSET-MIB.xsd"/>
<xsd:element name="snmp-data">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="context" minOccurs="0" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="prtGeneralEntry" type="prtGeneralEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
An entry exists in this table for each device entry in the
host resources MIB device table with a device type of
'printer'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtStorageRefEntry" type="prtStorageRefEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.5.2.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This table will have an entry for each entry in the Host
Resources MIB storage table that represents storage associated
with a printer managed by this agent.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtDeviceRefEntry" type="prtDeviceRefEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.5.3.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This table will have an entry for each entry in the Host
Resources MIB device table that represents a device associated
with a printer managed by this agent.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtCoverEntry" type="prtCoverEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.6.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Information about a cover or interlock.
Entries may exist in the table for each device
index with a device type of 'printer'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtLocalizationEntry" type="prtLocalizationEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.7.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A description of a localization.
Entries may exist in the table for each device
index with a device type of 'printer'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInputEntry" type="prtInputEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Attributes of a device capable of providing media for input to
the printing process. Entries may exist in the table for each
device index with a device type of 'printer'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputEntry" type="prtOutputEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Attributes of a device capable of receiving media delivered
from the printing process. Entries may exist in the table for
each device index with a device type of 'printer'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerEntry" type="prtMarkerEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Entries in this table define the characteristics and status
of each marker sub-unit in the printer.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerSuppliesEntry" type="prtMarkerSuppliesEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.11.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Attributes of a marker supply. Entries may exist in the table
for each device index with a device type of 'printer'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerColorantEntry" type="prtMarkerColorantEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.12.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Attributes of a colorant available on the printer. Entries may
exist in the table for each device index with a device type of
'printer'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMediaPathEntry" type="prtMediaPathEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Entries may exist in the table for each device index with a
device type of 'printer' Each entry defines the physical
characteristics of and the status of the media path. The data
provided indicates the maximum throughput and the media
size limitations of these subunits.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtChannelEntry" type="prtChannelEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.14.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Entries may exist in the table for each device index with a
device type of 'printer'. Each channel table entry is
characterized by a unique protocol stack and/or addressing.
The channel may also have printer dependent features that are
associated with a printing language.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInterpreterEntry" type="prtInterpreterEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Entries may exist in the table for each device index with a
device type of 'printer'. Each table entry provides a complete
description of the interpreter, including version information,
rendering resolutions, default character sets, output
orientation, and communication capabilities.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtConsoleDisplayBufferEntry" type="prtConsoleDisplayBufferEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.16.5.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This table contains one entry for each physical line on
the display. Lines cannot be added or deleted. Entries may
exist in the table for each device index with a device type of
'printer'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtConsoleLightEntry" type="prtConsoleLightEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.17.6.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Entries may exist in the table for each device index with a
device type of 'printer'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtAlertEntry" type="prtAlertEntryType" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.18.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Entries may exist in the table for each device
index with a device type of 'printer'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="ipaddr" type="xsd:NMTOKEN" use="required"/>
<xsd:attribute name="hostname" type="xsd:NMTOKEN"/>
<xsd:attribute name="port" type="xsd:unsignedInt" use="required"/>
<xsd:attribute name="community" type="xsd:NMTOKEN" use="required"/>
<xsd:attribute name="caching" type="xsd:NMTOKEN"/>
<xsd:attribute name="time" type="xsd:dateTime" use="required"/>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="prtGeneralEntryType">
<xsd:sequence>
<xsd:element name="prtGeneralConfigChanges" type="SNMPv2-SMI:Counter32" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Counts configuration changes within the printer. A
configuration change is defined to be an action that results in
a change to any MIB object other than those that reflect status
or level, or those that act as counters or gauges. In addition,
any action that results in a row being added or deleted from
any table in the Printer MIB is considered a configuration
change. Such changes will often affect the capability of the
printer to service certain types of print jobs. Management
applications may cache infrequently changed configuration
information about sub units within the printer. This object
should be incremented whenever the agent wishes to notify
management applications that any cached configuration
information for this device is to be considered 'stale'. At
this point, the management application should flush any
configuration information cached about this device and fetch
new configuration information.
The following are examples of actions that would cause the
prtGeneralConfigChanges object to be incremented:
- Adding an output bin
- Changing the media in a sensing input tray
- Changing the value of prtInputMediaType
Note that the prtGeneralConfigChanges counter would not be
incremented when an input tray is temporarily removed to load
additional paper or when the level of an input device changes.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtGeneralCurrentLocalization" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of the prtLocalizationIndex corresponding to the
current language, country, and character set to be used for
localized string values that are identified as being dependent
on the value of this object. Note that this object does not
apply to localized strings in the prtConsole group or to any
object that is not explicitly identified as being localized
according to prtGeneralCurrentLocalization. When an object's
'charset' is controlled by the value of
prtGeneralCurrentLocalization, it MUST specify
PrtLocalizedDescriptionStringTC as its syntax.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtGeneralReset" type="IANA-PRINTER-MIB:PrtGeneralResetTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Setting this value to 'powerCycleReset', 'resetToNVRAM', or
'resetToFactoryDefaults' will result in the resetting of the
printer. When read, this object will always have the value
'notResetting(3)', and a SET of the value 'notResetting' shall
have no effect on the printer. Some of the defined values are
optional. However, every implementation must support at least
the values 'notResetting' and 'resetToNVRAM'.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtGeneralCurrentOperator" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The name of the person who is responsible for operating
this printer. It is suggested that this string include
information that would enable other humans to reach the
operator, such as a phone number. As a convention to
facilitate automatic notification of the operator by the
agent or network management station, the phone number,
fax number or email address should be indicated by the
URL schemes 'tel:', 'fax:' and 'mailto:', respectively.
If either the phone, fax, or email information is not
available, then a line should not be included for this
information.
NOTE: For interoperability purposes, it is advisable to
use email addresses formatted according to [RFC2822]
requirements.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="127"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtGeneralServicePerson" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.5</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The name of the person responsible for servicing this
printer. It is suggested that this string include
information that would enable other humans to reach the
service person, such as a phone number. As a convention
to facilitate automatic notification of the operator by
the agent or network management station, the phone
number, fax number or email address should be indicated
by the URL schemes 'tel:', 'fax:' and 'mailto:',
respectively. If either the phone, fax, or email
information is not available, then a line should not
be included for this information.
NOTE: For interoperability purposes, it is advisable to use
email addresses formatted per [RFC2822] requirements.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="127"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputDefaultIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.6</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of prtInputIndex corresponding to the default input
sub-unit: that is, this object selects the default source of
input media.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputDefaultIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.7</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of prtOutputIndex corresponding to the default
output sub-unit; that is, this object selects the default
output destination.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerDefaultIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.8</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of prtMarkerIndex corresponding to the
default marker sub-unit; that is, this object selects the
default marker.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMediaPathDefaultIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.9</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of prtMediaPathIndex corresponding to
the default media path; that is, the selection of the
default media path.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtConsoleLocalization" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.10</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of the prtLocalizationIndex corresponding to
the language, country, and character set to be used for the
console. This localization applies both to the actual display
on the console as well as the encoding of these console objects
in management operations. When an object's 'charset' is
controlled by the value of prtConsoleLocalization, it MUST
specify PrtConsoleDescriptionStringTC as its syntax.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtConsoleNumberOfDisplayLines" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.11</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The number of lines on the printer's physical
display. This value is 0 if there are no lines on the
physical display or if there is no physical display
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtConsoleNumberOfDisplayChars" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.12</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The number of characters per line displayed on the physical
display. This value is 0 if there are no lines on the physical
display or if there is no physical display
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtConsoleDisable" type="IANA-PRINTER-MIB:PrtConsoleDisableTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.13</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This value indicates how input is (or is not) accepted from
the operator console.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtAuxiliarySheetStartupPage" type="PresentOnOff" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.14</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Used to enable or disable printing a startup page. If enabled,
a startup page will be printed shortly after power-up, when the
device is ready. Typical startup pages include test patterns
and/or printer configuration information.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtAuxiliarySheetBannerPage" type="PresentOnOff" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.15</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Used to enable or disable printing banner pages at the
beginning of jobs. This is a master switch which applies to all
jobs, regardless of interpreter.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtGeneralPrinterName" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.16</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
An administrator-specified name for this printer. Depending
upon implementation of this printer, the value of this object
may or may not be same as the value for the MIB-II 'SysName'
object.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="127"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtGeneralSerialNumber" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.17</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A recorded serial number for this device that indexes some
type device catalog or inventory. This value is usually set by
the device manufacturer but the MIB supports the option of
writing for this object for site-specific administration of
device inventory or tracking.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="255"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtAlertCriticalEvents" type="SNMPv2-SMI:Counter32" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.18</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A running counter of the number of critical alert events that
have been recorded in the alert table. The value of this object
is RESET in the event of a power cycle operation (i.e., the
value is not persistent.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtAlertAllEvents" type="SNMPv2-SMI:Counter32" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.5.1.1.19</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A running counter of the total number of alert event entries
(critical and non-critical) that have been recorded in the
alert table
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtStorageRefEntryType">
<xsd:sequence>
<xsd:element name="prtStorageRefIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.5.2.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of the hrDeviceIndex of the printer device that this
storageEntry is associated with.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrStorageIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.2.3.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each logical storage area
contained by the host.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtStorageRefSeqNumber" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.5.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This value will be unique amongst all entries with a common
value of hrStorageIndex. This object allows a storage entry to
point to the multiple printer devices with which it is
associated.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtDeviceRefEntryType">
<xsd:sequence>
<xsd:element name="prtDeviceRefIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.5.3.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of the hrDeviceIndex of the printer device that this
deviceEntry is associated with.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtDeviceRefSeqNumber" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.5.3.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This value will be unique amongst all entries with a common
value of hrDeviceIndex. This object allows a device entry to
point to the multiple printer devices with which it is
associated.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtCoverEntryType">
<xsd:sequence>
<xsd:element name="prtCoverDescription" type="PrtLocalizedDescriptionStringTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.6.1.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The manufacturer provided cover sub-mechanism name in the
localization specified by prtGeneralCurrentLocalization.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtCoverStatus" type="IANA-PRINTER-MIB:PrtCoverStatusTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.6.1.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The status of this cover sub-unit.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtCoverIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.6.1.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value used by the printer to identify this Cover sub
unit. Although these values may change due to a major
reconfiguration of the device (e.g., the addition of new cover
sub-units to the printer), values SHOULD remain stable across
successive printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtLocalizationEntryType">
<xsd:sequence>
<xsd:element name="prtLocalizationLanguage" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.7.1.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A two character language code from ISO 639. Examples en,
es, fr, de. NOTE: These examples were shown as upper case in
RFC 1759 and are now shown as lower case to agree with ISO 639.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:minLength value="2"/>
<xsd:maxLength value="2"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtLocalizationCountry" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.7.1.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A two character country code from ISO 3166, a blank string
(two space characters) shall indicate that the country is not
defined. Examples: US, GB, FR, DE, ...
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:minLength value="2"/>
<xsd:maxLength value="2"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtLocalizationCharacterSet" type="IANA-CHARSET-MIB:IANACharset" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.7.1.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The coded character set used for this localization.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtLocalizationIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.7.1.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value used by the printer to identify this
localization entry. Although these values may change due to a
major reconfiguration of the device (e.g., the addition of new
localization data to the printer), values SHOULD remain
stable across successive printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtInputEntryType">
<xsd:sequence>
<xsd:element name="prtInputType" type="IANA-PRINTER-MIB:PrtInputTypeTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The type of technology (discriminated primarily according to
feeder mechanism type) employed by the input sub-unit. Note,
the Input Class provides for a descriptor field to further
qualify the other choice.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInputDimUnit" type="PrtMediaUnitTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The unit of measurement for use calculating and relaying
dimensional values for this input sub-unit.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInputMediaDimFeedDirDeclared" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This object provides the value of the declared dimension, in
the feed direction, of the media that is (or, if empty, was or
will be) in this input sub-unit. The feed direction is the
direction in which the media is fed on this sub-unit. This
dimension is measured in input sub-unit dimensional units
(controlled by prtInputDimUnit, which uses PrtMediaUnitTC). If
this input sub-unit can reliably sense this value, the value is
sensed by the printer and may not be changed by management
requests. Otherwise, the value may be changed. The value (-1)
means other and specifically means that this sub-unit places no
restriction on this parameter. The value (-2) indicates
unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputMediaDimXFeedDirDeclared" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.5</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This object provides the value of the declared dimension, in
the cross feed direction, of the media that is (or, if empty,
was or will be) in this input sub-unit. The cross feed
direction is ninety degrees relative to the feed direction
associated with this sub-unit. This dimension is measured in
input sub-unit dimensional units (controlled by
prtInputDimUnit,which uses PrtMediaUnitTC). If this input sub-
unit can reliably sense this value, the value is sensed by the
printer and may not be changed by management requests.
Otherwise, the value may be changed. The value (-1) means other
and specifically means that this sub-unit places no restriction
on this parameter. The value (-2) indicates unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputMediaDimFeedDirChosen" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.6</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The printer will act as if media of the chosen dimension (in
the feed direction) is present in this input source. Note that
this value will be used even if the input tray is empty. Feed
dimension measurements are taken relative to the feed direction
associated with that sub-unit and are in input sub-unit
dimensional units (controlled by prtInputDimUnit, which uses
PrtMediaUnitTC). If the printer supports the declared
dimension,the granted dimension is the same as the declared
dimension. If not, the granted dimension is set to the closest
dimension that the printer supports when the declared dimension
is set. The value (-1) means other and specifically indicates
that this sub-unit places no restriction on this parameter. The
value (-2)indicates unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputMediaDimXFeedDirChosen" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.7</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The printer will act as if media of the chosen dimension (in
the cross feed direction) is present in this input source. Note
that this value will be used even if the input tray is empty.
The cross feed direction is ninety degrees relative to the feed
direction associated with this sub-unit. This dimension is
measured in input sub-unit dimensional units (controlled by
prtInputDimUnit, which uses PrtMediaUnitTC). If the printer
supports the declare dimension, the granted dimension is the
same as the declared dimension. If not, the granted dimension
is set to the closest dimension that the printer supports when
the declared dimension is set. The value (-1) means other and
specifically indicates that this sub-unit places no restriction
on this parameter. The value (-2) indicates unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputCapacityUnit" type="PrtCapacityUnitTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.8</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The unit of measurement for use in calculating and relaying
capacity values for this input sub-unit.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInputMaxCapacity" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.9</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum capacity of the input sub-unit in input sub-unit
capacity units (PrtCapacityUnitTC). There is no convention
associated with the media itself so this value reflects claimed
capacity. If this input sub-unit can reliably sense this value,
the value is sensed by the printer and may not be changed by
management requests; otherwise, the value may be written (by a
Remote Control Panel or a Management Application). The value
(-1) means other and specifically indicates that the sub-unit
places no restrictions on this parameter. The value (-2) means
unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputCurrentLevel" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.10</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The current capacity of the input sub-unit in input sub-unit
capacity units (PrtCapacityUnitTC). If this input sub-unit can
reliably sense this value, the value is sensed by the printer
and may not be changed by management requests; otherwise, the
value may be written (by a Remote Control Panel or a Management
Application). The value (-1) means other and specifically
indicates that the sub-unit places no restrictions on this
parameter. The value (-2) means unknown. The value (-3) means
that the printer knows that at least one unit remains.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-3"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputStatus" type="PrtSubUnitStatusTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.11</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The current status of this input sub-unit.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInputMediaName" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.12</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A description of the media contained in this input sub-unit;
This description is to be used by a client to format and
Localize a string for display to a human operator. This
description is not processed by the printer. It is used to
provide information not expressible in terms of the other
media attributes (e.g., prtInputMediaDimFeedDirChosen,
prtInputMediaDimXFeedDirChosen, prtInputMediaWeight,
prtInputMediaType).
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputName" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.13</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The name assigned to this input sub-unit.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputVendorName" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.14</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The vendor name of this input sub-unit.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputModel" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.15</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The model name of this input sub-unit.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputVersion" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.16</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The version of this input sub-unit.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputSerialNumber" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.17</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The serial number assigned to this input sub-unit.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="32"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputDescription" type="PrtLocalizedDescriptionStringTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.18</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A free-form text description of this input sub-unit in the
localization specified by prtGeneralCurrentLocalization.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInputSecurity" type="PresentOnOff" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.19</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Indicates if this input sub-unit has some security associated
with it.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInputMediaWeight" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.20</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The weight of the medium associated with this input sub-unit
in grams / per meter squared. The value (-2) means unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputMediaType" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.21</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The name of the type of medium associated with this input sub
unit. This name need not be processed by the printer; it might
simply be displayed to an operator.
NOTE: The above description has been modified from RFC 1759.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputMediaColor" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.22</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The name of the color of the medium associated with
this input sub-unit using standardized string values.
NOTE: The above description has been modified from RFC 1759.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputMediaFormParts" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.23</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The number of parts associated with the medium
associated with this input sub-unit if the medium is a
multi-part form. The value (-1) means other and
specifically indicates that the device places no
restrictions on this parameter. The value (-2) means
unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputMediaLoadTimeout" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.24</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
When the printer is not able to print due to a subunit being
empty or the requested media must be manually loaded, the
printer will wait for the duration (in seconds) specified by
this object. Upon expiration of the time-out, the printer will
take the action specified by prtInputNextIndex.
The event which causes the printer to enter the waiting state
is product specific. If the printer is not waiting for manually
fed media, it may switch from an empty subunit to a different
subunit without waiting for the time-out to expire.
A value of (-1) implies 'other' or 'infinite' which translates
to 'wait forever'. The action which causes printing to continue
is product specific. A value of (-2) implies 'unknown'.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInputNextIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.25</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of prtInputIndex corresponding to the input subunit
which will be used when this input subunit is emptied and the
time-out specified by prtInputMediaLoadTimeout expires. A value
of zero(0) indicates that auto input switching will not occur
when this input subunit is emptied. If the time-out specified
by prtInputLoadMediaTimeout expires and this value is zero(0),
the job will be aborted. A value of (-1) means other. The
value (-2)means 'unknown' and specifically indicates that an
implementation specific method will determine the next input
subunit to use at the time this subunit is emptied and the time
out expires. The value(-3) means input switching is not
supported for this subunit.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-3"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtInputIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.8.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value used by the printer to identify this input
sub-unit. Although these values may change due to a major
reconfiguration of the device (e.g., the addition of new input
sub-units to the printer), values SHOULD remain stable across
successive printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtOutputEntryType">
<xsd:sequence>
<xsd:element name="prtOutputType" type="IANA-PRINTER-MIB:PrtOutputTypeTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The type of technology supported by this output sub-unit.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputCapacityUnit" type="PrtCapacityUnitTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The unit of measurement for use in calculating and relaying
capacity values for this output sub-unit.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputMaxCapacity" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum capacity of this output sub-unit in output sub-
unit capacity units (PrtCapacityUnitTC). There is no convention
associated with the media itself so this value essentially
reflects claimed capacity. If this output sub-unit can reliably
sense this value, the value is sensed by the printer and may
not be changed by management requests; otherwise, the value may
be written (by a Remote Control Panel or a Management
Application). The value (-1) means other and specifically
indicates that the sub-unit places no restrictions on this
parameter. The value (-2) means unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputRemainingCapacity" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.5</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The remaining capacity of the possible output sub-unit
capacity in output sub-unit capacity units
(PrtCapacityUnitTC)of this output sub-unit. If this output sub-
unit can reliably sense this value, the value is sensed by the
printer and may not be modified by management requests;
otherwise, the value may be written (by a Remote Control Panel
or a Management Application). The value (-1) means other and
specifically indicates that the sub-unit places no restrictions
on this parameter. The value (-2) means unknown. The value
(-3) means that the printer knows that there remains capacity
for at least one unit.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-3"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputStatus" type="PrtSubUnitStatusTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.6</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The current status of this output sub-unit.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputName" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.7</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The name assigned to this output sub-unit.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputVendorName" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.8</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The vendor name of this output sub-unit.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputModel" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.9</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The model name assigned to this output sub-unit.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputVersion" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.10</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The version of this output sub-unit.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputSerialNumber" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.11</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The serial number assigned to this output sub-unit.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputDescription" type="PrtLocalizedDescriptionStringTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.12</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A free-form text description of this output sub-unit in the
localization specified by prtGeneralCurrentLocalization.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputSecurity" type="PresentOnOff" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.13</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Indicates if this output sub-unit has some security associated
with it and if that security is enabled or not.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputDimUnit" type="PrtMediaUnitTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.14</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The unit of measurement for use in calculating and relaying
dimensional values for this output sub-unit.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputMaxDimFeedDir" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.15</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum dimensions supported by this output sub-unit
for measurements taken parallel relative to the feed
direction associated with that sub-unit in output
sub-unit dimensional units (controlled by prtOutputDimUnit,
which uses PrtMediaUnitTC). If this output sub-unit can
reliably sense this value, the value is sensed by the printer
and may not be changed with management protocol operations.
The value (-1) means other and specifically indicates that the
sub-unit places no restrictions on this parameter. The value
(-2) means unknown.
NOTE: The above description has been modified from RFC 1759
for clarification and to explain the purpose of (-1) and (-2).
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputMaxDimXFeedDir" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.16</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum dimensions supported by this output sub-unit
for measurements taken ninety degrees relative to the
feed direction associated with that sub-unit in output
sub-unit dimensional units (controlled by prtOutputDimUnit,
which uses PrtMediaUnitTC). If this output sub-unit can
reliably sense this value, the value is sensed by the printer
and may not be changed with management protocol operations.
The value (-1) means other and specifically indicates that the
sub-unit places no restrictions on this parameter. The value
(-2) means unknown.
NOTE: The above description has been modified from RFC 1759
for clarification and to explain the purpose of (-1) and (-2).
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputMinDimFeedDir" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.17</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The minimum dimensions supported by this output sub-unit
for measurements taken parallel relative to the feed
direction associated with that sub-unit in output
sub-unit dimensional units (controlled by prtOutputDimUnit,
which uses PrtMediaUnitTC). If this output sub-unit can
reliably sense this value, the value is sensed by the printer
and may not be changed with management protocol operations.
The value (-1) means other and specifically indicates that the
sub-unit places no restrictions on this parameter. The value
(-2) means unknown.
NOTE: The above description has been modified from RFC 1759
for clarification and to explain the purpose of (-1) and (-2).
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputMinDimXFeedDir" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.18</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The minimum dimensions supported by this output sub-unit
for measurements taken ninety degrees relative to the
feed direction associated with that sub-unit in output
sub-unit dimensional units (controlled by prtOutputDimUnit,
which uses PrtMediaUnitTC). If this output sub-unit can
reliably sense this value, the value is sensed by the printer
and may not be changed with management protocol operations.
The value (-1) means other and specifically indicates that the
sub-unit places no restrictions on this parameter. The value
(-2) means unknown.
NOTE: The above description has been modified from RFC 1759
for clarification and to explain the purpose of (-1) and (-2).
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtOutputStackingOrder" type="PrtOutputStackingOrderTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.19</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The current state of the stacking order for the
associated output sub-unit. 'FirstToLast' means
that as pages are output the front of the next page is
placed against the back of the previous page.
'LasttoFirst' means that as pages are output the back
of the next page is placed against the front of the
previous page.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputPageDeliveryOrientation" type="PrtOutputPageDeliveryOrientationTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.20</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The reading surface that will be 'up' when pages are
delivered to the associated output sub-unit. Values are
faceUp and faceDown. (Note: interpretation of these
values is in general context-dependent based on locale;
presentation of these values to an end-user should be
normalized to the expectations of the user).
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputBursting" type="PresentOnOff" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.21</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This object indicates that the outputting sub-unit supports
bursting, and if so, whether the feature is enabled. Bursting
is the process by which continuous media is separated into
individual sheets, typically by bursting along pre-formed
perforations.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputDecollating" type="PresentOnOff" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.22</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This object indicates that the output supports decollating,
and if so, whether the feature is enabled. Decollating is the
process by which the individual parts within a multi-part form
are separated and sorted into separate stacks for each part.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputPageCollated" type="PresentOnOff" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.23</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This object indicates that the output sub-unit supports page
collation, and if so, whether the feature is enabled. See RFC
3805 Appendix A, Glossary Of Terms, for definition of how this
document defines collation.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtOutputOffsetStacking" type="PresentOnOff" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.24</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This object indicates that the output supports offset
stacking,and if so, whether the feature is enabled. See RFC
3805 Appendix A, Glossary Of Terms, for how Offset Stacking is
defined by this document.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtOutputIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.9.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value used by this printer to identify this output
sub-unit. Although these values may change due to a major
reconfiguration of the sub-unit (e.g., the addition of new
output devices to the printer), values SHOULD remain stable
across successive printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtMarkerEntryType">
<xsd:sequence>
<xsd:element name="prtMarkerMarkTech" type="IANA-PRINTER-MIB:PrtMarkerMarkTechTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The type of marking technology used for this marking
sub-unit.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerCounterUnit" type="PrtMarkerCounterUnitTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The unit that will be used by the printer when reporting
counter values for this marking sub-unit. The time units of
measure are provided for a device like a strip recorder that
does not or cannot track the physical dimensions of the media
and does not use characters, lines or sheets.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerLifeCount" type="SNMPv2-SMI:Counter32" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The count of the number of units of measure counted during the
life of printer using units of measure as specified by
prtMarkerCounterUnit.
Note: This object should be implemented as a persistent object
with a reliable value throughout the lifetime of the printer.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerPowerOnCount" type="SNMPv2-SMI:Counter32" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.5</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The count of the number of units of measure counted since the
equipment was most recently powered on using units of measure
as specified by prtMarkerCounterUnit.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerProcessColorants" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.6</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The number of process colors supported by this marker. A
process color of 1 implies monochrome. The value of this
object and prtMarkerSpotColorants cannot both be 0. The value
of prtMarkerProcessColorants must be 0 or greater.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerSpotColorants" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.7</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The number of spot colors supported by this marker. The value
of this object and prtMarkerProcessColorants cannot both be 0.
Must be 0 or greater.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerAddressabilityUnit" type="PrtMarkerAddressabilityUnitTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.8</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The unit of measure of distances, as applied to the marker's
resolution.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerAddressabilityFeedDir" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.9</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum number of addressable marking positions in the
feed direction per 10000 units of measure specified by
prtMarkerAddressabilityUnit. A value of (-1) implies 'other'
or 'infinite' while a value of (-2) implies 'unknown'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerAddressabilityXFeedDir" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.10</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum number of addressable marking positions in the
cross feed direction in 10000 units of measure specified by
prtMarkerAddressabilityUnit. A value of (-1) implies 'other'
or 'infinite' while a value of (-2) implies 'unknown'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerNorthMargin" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.11</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The margin, in units identified by prtMarkerAddressabilityUnit,
from the leading edge of the medium as the medium flows through
the marking engine with the side to be imaged facing the
observer. The leading edge is the North edge and the other
edges are defined by the normal compass layout of directions
with the compass facing the observer. Printing within the area
bounded by all four margins is guaranteed for all interpreters.
The value (-2) means unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerSouthMargin" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.12</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The margin from the South edge (see prtMarkerNorthMargin) of
the medium in units identified by prtMarkerAddressabilityUnit.
Printing within the area bounded by all four margins is
guaranteed for all interpreters. The value (-2) means unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerWestMargin" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.13</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The margin from the West edge (see prtMarkerNorthMargin) of
the medium in units identified by prtMarkerAddressabilityUnit.
Printing within the area bounded by all four margins is
guaranteed for all interpreters. The value (-2) means unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerEastMargin" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.14</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The margin from the East edge (see prtMarkerNorthMargin) of
the medium in units identified by prtMarkerAddressabilityUnit.
Printing within the area bounded by all four margins is
guaranteed for all interpreters. The value (-2) means unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerStatus" type="PrtSubUnitStatusTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.15</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The current status of this marker sub-unit.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtMarkerIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.10.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value used by the printer to identify this marking
SubUnit. Although these values may change due to a major
reconfiguration of the device (e.g., the addition of new marking
sub-units to the printer), values SHOULD remain stable across
successive printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtMarkerSuppliesEntryType">
<xsd:sequence>
<xsd:element name="prtMarkerSuppliesMarkerIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.11.1.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of prtMarkerIndex corresponding to the marking sub
unit with which this marker supply sub-unit is associated.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerSuppliesColorantIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.11.1.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of prtMarkerColorantIndex corresponding to the
colorant with which this marker supply sub-unit is associated.
This value shall be 0 if there is no colorant table or if this
supply does not depend on a single specified colorant.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerSuppliesClass" type="PrtMarkerSuppliesClassTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.11.1.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Indicates whether this supply entity represents a supply that
is consumed or a receptacle that is filled.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerSuppliesType" type="IANA-PRINTER-MIB:PrtMarkerSuppliesTypeTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.11.1.1.5</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The type of this supply.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerSuppliesDescription" type="PrtLocalizedDescriptionStringTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.11.1.1.6</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The description of this supply container/receptacle in the
localization specified by prtGeneralCurrentLocalization.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerSuppliesSupplyUnit" type="PrtMarkerSuppliesSupplyUnitTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.11.1.1.7</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Unit of measure of this marker supply container/receptacle.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerSuppliesMaxCapacity" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.11.1.1.8</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum capacity of this supply container/receptacle
expressed in prtMarkerSuppliesSupplyUnit. If this supply
container/receptacle can reliably sense this value, the value
is reported by the printer and is read-only; otherwise, the
value may be written (by a Remote Control Panel or a Management
Application). The value (-1) means other and specifically
indicates that the sub-unit places no restrictions on this
parameter. The value (-2) means unknown.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerSuppliesLevel" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.11.1.1.9</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The current level if this supply is a container; the remaining
space if this supply is a receptacle. If this supply
container/receptacle can reliably sense this value, the value
is reported by the printer and is read-only; otherwise, the
value may be written (by a Remote Control Panel or a Management
Application). The value (-1) means other and specifically
indicates that the sub-unit places no restrictions on this
parameter. The value (-2) means unknown. A value of (-3) means
that the printer knows that there is some supply/remaining
space, respectively.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-3"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtMarkerSuppliesIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.11.1.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value used by the printer to identify this marker
supply. Although these values may change due to a major
reconfiguration of the device (e.g., the addition of new marker
supplies to the printer), values SHOULD remain stable across
successive printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtMarkerColorantEntryType">
<xsd:sequence>
<xsd:element name="prtMarkerColorantMarkerIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.12.1.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of prtMarkerIndex corresponding to the marker sub
unit with which this colorant entry is associated.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerColorantRole" type="PrtMarkerColorantRoleTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.12.1.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The role played by this colorant.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMarkerColorantValue" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.12.1.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The name of the color of this colorant using standardized
string names from ISO 10175 (DPA) and ISO 10180 (SPDL) such as:
other
unknown
white
red
green
blue
cyan
magenta
yellow
black
Implementers may add additional string values. The naming
conventions in ISO 9070 are recommended in order to avoid
potential name clashes
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="255"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMarkerColorantTonality" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.12.1.1.5</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The distinct levels of tonality realizable by a marking sub
unit when using this colorant. This value does not include the
number of levels of tonal difference that an interpreter can
obtain by techniques such as half toning. This value must be at
least 2.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtMarkerColorantIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.12.1.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value used by the printer to identify this colorant.
Although these values may change due to a major reconfiguration
of the device (e.g., the addition of new colorants to the
printer) , values SHOULD remain stable across successive
printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtMediaPathEntryType">
<xsd:sequence>
<xsd:element name="prtMediaPathMaxSpeedPrintUnit" type="PrtMediaPathMaxSpeedPrintUnitTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The unit of measure used in specifying the speed of all media
paths in the printer.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMediaPathMediaSizeUnit" type="PrtMediaUnitTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The units of measure of media size for use in calculating and
relaying dimensional values for all media paths in the
printer.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMediaPathMaxSpeed" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum printing speed of this media path expressed in
prtMediaPathMaxSpeedUnit's. A value of (-1) implies 'other'.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMediaPathMaxMediaFeedDir" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1.5</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum physical media size in the feed direction of this
media path expressed in units of measure specified by
PrtMediaPathMediaSizeUnit. A value of (-1) implies 'unlimited'
a value of (-2) implies 'unknown'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMediaPathMaxMediaXFeedDir" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1.6</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum physical media size across the feed direction of
this media path expressed in units of measure specified by
prtMediaPathMediaSizeUnit. A value of (-2) implies 'unknown'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMediaPathMinMediaFeedDir" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1.7</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The minimum physical media size in the feed direction of this
media path expressed in units of measure specified by
prtMediaPathMediaSizeUnit. A value of (-2) implies 'unknown'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMediaPathMinMediaXFeedDir" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1.8</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The minimum physical media size across the feed direction of
this media path expressed in units of measure specified by
prtMediaPathMediaSizeUnit. A value of (-2) implies 'unknown'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtMediaPathType" type="IANA-PRINTER-MIB:PrtMediaPathTypeTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1.9</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The type of the media path for this media path.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMediaPathDescription" type="PrtLocalizedDescriptionStringTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1.10</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The manufacturer-provided description of this media path in
the localization specified by prtGeneralCurrentLocalization.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtMediaPathStatus" type="PrtSubUnitStatusTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1.11</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The current status of this media path.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtMediaPathIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.13.4.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value used by the printer to identify this media
path. Although these values may change due to a major
reconfiguration of the device (e.g., the addition of new media
paths to the printer), values SHOULD remain stable across
successive printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtChannelEntryType">
<xsd:sequence>
<xsd:element name="prtChannelType" type="IANA-PRINTER-MIB:PrtChannelTypeTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.14.1.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The type of this print data channel. This object provides the
linkage to ChannelType-specific groups that may (conceptually)
extend the prtChannelTable with additional details about that
channel.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtChannelProtocolVersion" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.14.1.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The version of the protocol used on this channel. The format
used for version numbering depends on prtChannelType.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="63"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtChannelCurrentJobCntlLangIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.14.1.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of prtInterpreterIndex corresponding to the Control
Language Interpreter for this channel. This interpreter defines
the syntax used for control functions, such as querying or
changing environment variables and identifying job boundaries
(e.g., PJL, PostScript, NPAP). A value of zero indicates that
there is no current Job Control Language Interpreter for this
channel.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtChannelDefaultPageDescLangIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.14.1.1.5</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of prtInterpreterIndex corresponding to the Page
Description Language Interpreter for this channel. This
interpreter defines the default Page Description Language
interpreter to be used for the print data unless the Control
Language is used to select a specific interpreter (e.g., PCL,
PostScript Language, auto-sense). A value of zero indicates
that there is no default page description language interpreter
for this channel.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtChannelState" type="PrtChannelStateTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.14.1.1.6</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The state of this print data channel. The value determines
whether control information and print data is allowed through
this channel or not.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtChannelIfIndex" type="IF-MIB:InterfaceIndexOrZero" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.14.1.1.7</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of ifIndex in the ifTable; see the Interfaces Group
MIB [RFC2863] which corresponds to this channel.
When more than one row of the ifTable is relevant, this is the
index of the row representing the topmost layer in the
interface hierarchy. A value of zero indicates that no
interface is associated with this channel.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtChannelStatus" type="PrtSubUnitStatusTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.14.1.1.8</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The current status of the channel.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtChannelInformation" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.14.1.1.9</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Auxiliary information to allow a printing application to use
the channel for data submission to the printer. An application
capable of using a specific PrtChannelType should be able to
use the combined information from the prtChannelInformation and
other channel and interface group objects to 'bootstrap' its
use of the channel. prtChannelInformation is not intended to
provide a general channel description, nor to provide
information that is available once the channel is in use.
The encoding and interpretation of the prtChannelInformation
object is specific to channel type. The description of each
PrtChannelType enum value for which prtChannelInformation is
defined specifies the appropriate encoding and interpretation,
including interaction with other objects. For channel types
that do not specify a prtChannelInformation value, its value
shall be null (0 length).
When a new PrtChannelType enumeration value is registered, its
accompanying description must specify the encoding and
interpretation of the prtChannelInformation value for the
channel type. prtChannelInformation semantics for an existing
PrtChannelType may be added or amended in the same manner as
described in section 2.4.1 for type 2 enumeration values.
The prtChannelInformation specifies values for a collection of
channel attributes, represented as text according to the
following rules:
1. The prtChannelInformation is not affected by localization.
2. The prtChannelInformation is a list of entries representing
the attribute values. Each entry consists of the following
items, in order:
a. A keyword, composed of alphabetic characters (A-Z, a-z)
represented by their NVT ASCII [RFC854] codes, that
identifies a channel attribute,
b. The NVT ASCII code for an Equals Sign (=) (code 61) to
delimit the keyword,
c. A data value encoded using rules specific to the
PrtChannelType to with the prtChannelInformation applies which
must in no case allow an octet with value 10 (the NVT ASCII
Line Feed code),
d. the NVT ASCII code for a Line Feed character (code 10) to
delimit the data value.
No other octets shall be present.
Keywords are case-sensitive. Conventionally, keywords are
capitalized (including each word of a multi-word keyword) and
since they occupy space in the prtChannelInformation, they are
kept short.
3. If a channel attribute has multiple values, it is
represented by multiple entries with the same keyword, each
specifying one value. Otherwise, there shall be at most one
entry for each attribute.
4. By default, entries may appear in any order. If there are
ordering constraints for particular entries, these must be
specified in their definitions.
5. The prtChannelInformation value by default consists of text
represented by NVT ASCII graphics character codes. However,
other representations may be specified:
a. In cases where the prtChannelInformation value contains
information not normally coded in textual form, whatever
symbolic representation is conventionally used for the
information should be used for encoding the
prtChannelInformation value. (For instance, a binary port value
might be represented as a decimal number using NVT ASCII
codes.) Such encoding must be specified in the definition of
the value.
b. The value may contain textual information in a character set
other than NVT ASCII graphics characters. (For instance, an
identifier might consist of ISO 10646 text encoded using the
UTF-8 encoding scheme.) Such a character set and its encoding
must be specified in the definition of the value.
6. For each PrtChannelType for which prtChannelInformation
entries are defined, the descriptive text associated with the
PrtChannelType enumeration value shall specify the following
information for each entry:
Title: Brief description phrase, e.g.: 'Port name',
'Service Name', etc.
Keyword: The keyword value, e.g.: 'Port' or 'Service'
Syntax: The encoding of the entry value if it cannot be
directly represented by NVT ASCII.
Status: 'Mandatory', 'Optional', or 'Conditionally
Mandatory'
Multiplicity: 'Single' or 'Multiple' to indicate whether the
entry may be present multiple times.
Description: Description of the use of the entry, other
information required to complete the definition
(e.g.: ordering constraints, interactions between
entries).
Applications that interpret prtChannelInformation should ignore
unrecognized entries, so they are not affected if new entry
types are added.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="255"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtChannelIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.14.1.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value used by the printer to identify this data
channel. Although these values may change due to a major
reconfiguration of the device (e.g., the addition of new data
channels to the printer), values SHOULD remain stable across
successive printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtInterpreterEntryType">
<xsd:sequence>
<xsd:element name="prtInterpreterLangFamily" type="IANA-PRINTER-MIB:PrtInterpreterLangFamilyTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The family name of a Page Description Language (PDL) or
control language which this interpreter in the printer can
interpret or emulate.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInterpreterLangLevel" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The level of the language which this interpreter is
interpreting or emulating. This might contain a value like
'5e'for an interpreter which is emulating level 5e of the PCL
language. It might contain '2' for an interpreter which is
emulating level 2 of the PostScript language. Similarly it
might contain '2' for an interpreter which is emulating level 2
of the HPGL language.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="31"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInterpreterLangVersion" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The date code or version of the language which this
interpreter is interpreting or emulating.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="31"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInterpreterDescription" type="PrtLocalizedDescriptionStringTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.5</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A string to identify this interpreter in the localization
specified by prtGeneralCurrentLocalization as opposed to the
language which is being interpreted. It is anticipated that
this string will allow manufacturers to unambiguously identify
their interpreters.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInterpreterVersion" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.6</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The date code, version number, or other product specific
information tied to this interpreter. This value is associated
with the interpreter, rather than with the version of the
language which is being interpreted or emulated.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="31"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInterpreterDefaultOrientation" type="PrtPrintOrientationTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.7</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The current orientation default for this interpreter. This
value may be overridden for a particular job (e.g., by a
command in the input data stream).
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInterpreterFeedAddressability" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.8</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum interpreter addressability in the feed
direction in 10000 prtMarkerAddressabilityUnits (as specified
by prtMarkerDefaultIndex) for this interpreter. The
value (-1) means other and specifically indicates that the
sub-unit places no restrictions on this parameter. The value
(-2) means unknown.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInterpreterXFeedAddressability" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.9</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The maximum interpreter addressability in the cross feed
direction in 10000 prtMarkerAddressabilityUnits (as specified
by prtMarkerDefaultIndex) for this interpreter. The
value (-1) means other and specifically indicates that the
sub-unit places no restrictions on this parameter. The value
(-2) means unknown.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtInterpreterDefaultCharSetIn" type="IANA-CHARSET-MIB:IANACharset" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.10</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The default coded character set for input octets encountered
outside a context in which the Page Description Language
established the interpretation of the octets. (Input octets are
presented to the interpreter through a path defined in the
channel group.)
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInterpreterDefaultCharSetOut" type="IANA-CHARSET-MIB:IANACharset" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.11</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The default character set for data coming from this
interpreter through the printer's output channel (i.e. the
'backchannel').
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtInterpreterTwoWay" type="PrtInterpreterTwoWayTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.12</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
Indicates whether or not this interpreter returns information
back to the host.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtInterpreterIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.15.1.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each PDL or control language for which
there exists an interpreter or emulator in the printer. The
value is used to identify this interpreter. Although these
values may change due to a major reconfiguration of the device
(e.g., the addition of new interpreters to the printer), values
SHOULD remain stable across successive printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtConsoleDisplayBufferEntryType">
<xsd:sequence>
<xsd:element name="prtConsoleDisplayBufferText" type="PrtConsoleDescriptionStringTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.16.5.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The content of a line in the logical display buffer of
the operator's console of the printer. When a write
operation occurs, normally a critical message, to one of
the LineText strings, the agent should make that line
displayable if a physical display is present. Writing a zero
length string clears the line. It is an implementation-
specific matter as to whether the agent allows a line to be
overwritten before it has been cleared. Printer generated
strings shall be in the localization specified by
prtConsoleLocalization.Management Application generated strings
should be localized by the Management Application.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtConsoleDisplayBufferIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.16.5.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each console line in the printer. The value
is used to identify this console line. Although these values
may change due to a major reconfiguration of the device (e.g.,
the addition of new console lines to the printer). Values
SHOULD remain stable across successive printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtConsoleLightEntryType">
<xsd:sequence>
<xsd:element name="prtConsoleOnTime" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.17.6.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This object, in conjunction with prtConsoleOffTime, defines
the current status of the light. If both prtConsoleOnTime and
prtConsoleOffTime are non-zero, the lamp is blinking and the
values presented define the on time and off time, respectively,
in milliseconds. If prtConsoleOnTime is zero and
prtConsoleOffTime is non-zero, the lamp is off. If
prtConsoleOffTime is zero and prtConsoleOnTime is non-zero, the
lamp is on. If both values are zero the lamp is off.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtConsoleOffTime" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-write</maxAccess>
<oid>1.3.6.1.2.1.43.17.6.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
This object, in conjunction with prtConsoleOnTime, defines the
current status of the light. If both prtConsoleOnTime and
prtConsoleOffTime are non-zero, the lamp is blinking and the
values presented define the on time and off time, respectively,
in milliseconds. If prtConsoleOnTime is zero and
prtConsoleOffTime is non-zero, the lamp is off. If
prtConsoleOffTime is zero and prtConsoleOnTime is non-zero, the
lamp is on. If both values are zero the lamp is off.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtConsoleColor" type="IANA-PRINTER-MIB:PrtConsoleColorTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.17.6.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The color of this light.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtConsoleDescription" type="PrtConsoleDescriptionStringTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.17.6.1.5</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The vendor description or label of this light in the
localization specified by prtConsoleLocalization.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtConsoleLightIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>not-accessible</maxAccess>
<oid>1.3.6.1.2.1.43.17.6.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value used by the printer to identify this light.
Although these values may change due to a major
reconfiguration of the device (e.g., the addition of new lights
to the printer). Values SHOULD remain stable across successive
printer power cycles.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="65535"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:complexType name="prtAlertEntryType">
<xsd:sequence>
<xsd:element name="prtAlertSeverityLevel" type="PrtAlertSeverityLevelTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.18.1.1.2</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The level of severity of this alert table entry. The printer
determines the severity level assigned to each entry into the
table.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtAlertTrainingLevel" type="IANA-PRINTER-MIB:PrtAlertTrainingLevelTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.18.1.1.3</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
See TEXTUAL-CONVENTION PrtAlertTrainingLevelTC.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtAlertGroup" type="IANA-PRINTER-MIB:PrtAlertGroupTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.18.1.1.4</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The type of sub-unit within the printer model that this alert
is related. Input, output, and markers are examples of printer
model groups, i.e., examples of types of sub-units. Wherever
possible, these enumerations match the sub-identifier that
identifies the relevant table in the printmib.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtAlertGroupIndex" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.18.1.1.5</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The low-order index of the row within the table identified
by prtAlertGroup that represents the sub-unit of the printer
that caused this alert, or -1 if not applicable. The
combination of the prtAlertGroup and the prtAlertGroupIndex
defines exactly which printer sub-unit caused the alert; for
example, Input #3, Output#2, and Marker #1. Every object in
this MIB is indexed with hrDeviceIndex and optionally, another
index variable. If this other index variable is present in the
table that generated the alert, it will be used as the value
for this object. Otherwise, this value shall be -1.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtAlertLocation" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.18.1.1.6</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The sub-unit location that is defined by the printer
manufacturer to further refine the location of this alert
within the designated sub-unit. The location is used in
conjunction with the Group and GroupIndex values; for example,
there is an alert in Input #2 at location number 7. The value
(-2) indicates unknown.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="-2"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="prtAlertCode" type="IANA-PRINTER-MIB:PrtAlertCodeTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.18.1.1.7</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
See associated TEXTUAL-CONVENTION PrtAlertCodeTC.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtAlertDescription" type="PrtLocalizedDescriptionStringTC" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.18.1.1.8</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A description of this alert entry in the localization
specified by prtGeneralCurrentLocalization. The description is
provided by the printer to further elaborate on the enumerated
alert or provide information in the case where the code is
classified as 'other' or 'unknown'. The printer is required to
return a description string but the string may be a null
string.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="prtAlertTime" type="SNMPv2-SMI:TimeTicks" minOccurs="0">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.18.1.1.9</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The value of sysUpTime at the time that this alert was
generated.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="hrDeviceIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.25.3.2.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
<xsd:attribute name="prtAlertIndex" use="required">
<xsd:annotation>
<xsd:appinfo>
<maxAccess>read-only</maxAccess>
<oid>1.3.6.1.2.1.43.18.1.1.1</oid>
<status>current</status>
</xsd:appinfo>
<xsd:documentation>
The index value used to determine which alerts have been added
or removed from the alert table. This is an incrementing
integer initialized to 1 when the printer is reset. (i.e., The
first event placed in the alert table after a reset of the
printer shall have an index value of 1.) When the printer adds
an alert to the table, that alert is assigned the next higher
integer value from the last item entered into the table. If
the index value reaches its maximum value, the next index value
used must be 1.
NOTE: The management application will read the alert table when
a trap or event notification occurs or at a periodic rate and
then parse the table to determine if any new entries were added
by comparing the last known index value with the current
highest index value. The management application will then
update its copy of the alert table. When the printer discovers
that an alert is no longer active, the printer shall remove the
row for that alert from the table and shall reduce the number
of rows in the table. The printer may add or delete any number
of rows from the table at any time. The management station can
detect when binary change alerts have been deleted by
requesting an attribute of each alert, and noting alerts as
deleted when that retrieval is not possible. The objects
'prtAlertCriticalEvents'and 'prtAlertAllEvents' in the
'prtGeneralTable' reduce the need for management applications
to scan the 'prtAlertTable'.
NOTE: The above description has been modified from RFC 1759
for clarification.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="1"/>
<xsd:maxInclusive value="2147483647"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:attribute>
</xsd:complexType>
<xsd:simpleType name="PrtMediaUnitTC">
<xsd:annotation>
<xsd:documentation>
Units of measure for media dimensions.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="tenThousandthsOfInches">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="micrometers">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="MediaUnit">
<xsd:annotation>
<xsd:documentation>
Units of measure for media dimensions.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="tenThousandthsOfInches">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="micrometers">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtCapacityUnitTC">
<xsd:annotation>
<xsd:documentation>
Units of measure for media capacity.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="other">
<xsd:annotation>
<xsd:appinfo>
<intVal>1</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="unknown">
<xsd:annotation>
<xsd:appinfo>
<intVal>2</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="tenThousandthsOfInches">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="micrometers">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="sheets">
<xsd:annotation>
<xsd:appinfo>
<intVal>8</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="feet">
<xsd:annotation>
<xsd:appinfo>
<intVal>16</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="meters">
<xsd:annotation>
<xsd:appinfo>
<intVal>17</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="items">
<xsd:annotation>
<xsd:appinfo>
<intVal>18</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="percent">
<xsd:annotation>
<xsd:appinfo>
<intVal>19</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="CapacityUnit">
<xsd:annotation>
<xsd:documentation>
Units of measure for media capacity.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="tenThousandthsOfInches">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="micrometers">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="sheets">
<xsd:annotation>
<xsd:appinfo>
<intVal>8</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="feet">
<xsd:annotation>
<xsd:appinfo>
<intVal>16</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="meters">
<xsd:annotation>
<xsd:appinfo>
<intVal>17</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtPrintOrientationTC">
<xsd:annotation>
<xsd:documentation>
A generic representation for printing orientation on a
'page'.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="other">
<xsd:annotation>
<xsd:appinfo>
<intVal>1</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="portrait">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="landscape">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtSubUnitStatusTC">
<xsd:annotation>
<xsd:documentation>
Status of a printer sub-unit.
The SubUnitStatus is an integer that is the sum of 5 distinct
values, Availability, Non-Critical, Critical, On-line, and
Transitioning. These values are:
Availability Value
Available and Idle 0 0000'b
Available and Standby 2 0010'b
Available and Active 4 0100'b
Available and Busy 6 0110'b
Unavailable and OnRequest 1 0001'b
Unavailable because Broken 3 0011'b
Unknown 5 0101'b
Non-Critical
No Non-Critical Alerts 0 0000'b
Non-Critical Alerts 8 1000'b
Critical
No Critical Alerts 0 0000'b
Critical Alerts 16 1 0000'b
On-Line
State is On-Line 0 0000'b
State is Off-Line 32 10 0000'b
Transitioning
At intended state 0 0000'b
Transitioning to intended state 64 100 0000'b
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="126"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="SubUnitStatus">
<xsd:annotation>
<xsd:documentation>
Status of a printer sub-unit.
The SubUnitStatus is an integer that is the sum of 5 distinct
values, Availability, Non-Critical, Critical, On-line, and
Transitioning. These values are:
Availability Value
Available and Idle 0 0000'b
Available and Standby 2 0010'b
Available and Active 4 0100'b
Available and Busy 6 0110'b
Unavailable and OnRequest 1 0001'b
Unavailable because Broken 3 0011'b
Unknown 5 0101'b
Non-Critical
No Non-Critical Alerts 0 0000'b
Non-Critical Alerts 8 1000'b
Critical
No Critical Alerts 0 0000'b
Critical Alerts 16 1 0000'b
On-Line
State is On-Line 0 0000'b
State is Off-Line 32 10 0000'b
Transitioning
At intended state 0 0000'b
Transitioning to intended state 64 100 0000'b
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="smi:Integer32">
<xsd:minInclusive value="0"/>
<xsd:maxInclusive value="126"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PresentOnOff">
<xsd:annotation>
<xsd:documentation>
Presence and configuration of a device or feature.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="other">
<xsd:annotation>
<xsd:appinfo>
<intVal>1</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="on">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="off">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="notPresent">
<xsd:annotation>
<xsd:appinfo>
<intVal>5</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtLocalizedDescriptionStringTC">
<xsd:annotation>
<xsd:documentation>
An object MUST use this TEXTUAL-CONVENTION when its
'charset' is controlled by the value of
prtGeneralCurrentLocalization.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="255"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtConsoleDescriptionStringTC">
<xsd:annotation>
<xsd:documentation>
An object MUST use this TEXTUAL-CONVENTION when its
'charset' is controlled by the value of
prtConsoleLocalization.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="smi:OctetString">
<xsd:maxLength value="255"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="CodedCharSet">
<xsd:annotation>
<xsd:documentation>
The original description clause from RFC 1759 [RFC1759] was
technically inaccurate and therefore has been deleted.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="other">
<xsd:annotation>
<xsd:appinfo>
<intVal>1</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtChannelStateTC">
<xsd:annotation>
<xsd:documentation>
The state of this print job delivery channel. The value
determines whether print data is allowed through this channel.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="other">
<xsd:annotation>
<xsd:appinfo>
<intVal>1</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="printDataAccepted">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="noDataAccepted">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtOutputStackingOrderTC">
<xsd:annotation>
<xsd:documentation>
The current state of the stacking order for the associated
output sub-unit. 'firstToLast' means that as pages are output,
the front of the next page is placed against the back of the
previous page. 'lastToFirst' means that as pages are output,
the back of the next page is placed against the front of the
previous page.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="unknown">
<xsd:annotation>
<xsd:appinfo>
<intVal>2</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="firstToLast">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="lastToFirst">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtOutputPageDeliveryOrientationTC">
<xsd:annotation>
<xsd:documentation>
The reading surface that will be 'up' when pages are delivered
to the associated output sub-unit. Values are Face-Up and Face
Down (Note: interpretation of these values is, in general,
context-dependent based on locale; presentation of these values
to an end-user should be normalized to the expectations of the
user.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="faceUp">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="faceDown">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtMarkerCounterUnitTC">
<xsd:annotation>
<xsd:documentation>
The unit that will be used by the printer when reporting
counter values for this marking sub-unit. The
time units of measure are provided for a device like a
strip recorder that does not or cannot track the physical
dimensions of the media and does not use characters,
lines or sheets.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="tenThousandthsOfInches">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="micrometers">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="characters">
<xsd:annotation>
<xsd:appinfo>
<intVal>5</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="lines">
<xsd:annotation>
<xsd:appinfo>
<intVal>6</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="impressions">
<xsd:annotation>
<xsd:appinfo>
<intVal>7</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="sheets">
<xsd:annotation>
<xsd:appinfo>
<intVal>8</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="dotRow">
<xsd:annotation>
<xsd:appinfo>
<intVal>9</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="hours">
<xsd:annotation>
<xsd:appinfo>
<intVal>11</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="feet">
<xsd:annotation>
<xsd:appinfo>
<intVal>16</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="meters">
<xsd:annotation>
<xsd:appinfo>
<intVal>17</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtMarkerSuppliesSupplyUnitTC">
<xsd:annotation>
<xsd:documentation>
Unit of this marker supply container/receptacle.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="other">
<xsd:annotation>
<xsd:appinfo>
<intVal>1</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="unknown">
<xsd:annotation>
<xsd:appinfo>
<intVal>2</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="tenThousandthsOfInches">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="micrometers">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="impressions">
<xsd:annotation>
<xsd:appinfo>
<intVal>7</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="sheets">
<xsd:annotation>
<xsd:appinfo>
<intVal>8</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="hours">
<xsd:annotation>
<xsd:appinfo>
<intVal>11</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="thousandthsOfOunces">
<xsd:annotation>
<xsd:appinfo>
<intVal>12</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="tenthsOfGrams">
<xsd:annotation>
<xsd:appinfo>
<intVal>13</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="hundrethsOfFluidOunces">
<xsd:annotation>
<xsd:appinfo>
<intVal>14</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="tenthsOfMilliliters">
<xsd:annotation>
<xsd:appinfo>
<intVal>15</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="feet">
<xsd:annotation>
<xsd:appinfo>
<intVal>16</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="meters">
<xsd:annotation>
<xsd:appinfo>
<intVal>17</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="items">
<xsd:annotation>
<xsd:appinfo>
<intVal>18</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="percent">
<xsd:annotation>
<xsd:appinfo>
<intVal>19</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtMarkerSuppliesClassTC">
<xsd:annotation>
<xsd:documentation>
Indicates whether this supply entity represents a supply
that is consumed or a receptacle that is filled.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="other">
<xsd:annotation>
<xsd:appinfo>
<intVal>1</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="supplyThatIsConsumed">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="receptacleThatIsFilled">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtMarkerColorantRoleTC">
<xsd:annotation>
<xsd:documentation>
The role played by this colorant.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="other">
<xsd:annotation>
<xsd:appinfo>
<intVal>1</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="process">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="spot">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtMarkerAddressabilityUnitTC">
<xsd:annotation>
<xsd:documentation>
The unit of measure of distances, as applied to the marker's
resolution.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="tenThousandthsOfInches">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="micrometers">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtMediaPathMaxSpeedPrintUnitTC">
<xsd:annotation>
<xsd:documentation>
The unit of measure used in specifying the speed of all
media paths in the printer.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="tenThousandthsOfInchesPerHour">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="micrometersPerHour">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="charactersPerHour">
<xsd:annotation>
<xsd:appinfo>
<intVal>5</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="linesPerHour">
<xsd:annotation>
<xsd:appinfo>
<intVal>6</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="impressionsPerHour">
<xsd:annotation>
<xsd:appinfo>
<intVal>7</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="sheetsPerHour">
<xsd:annotation>
<xsd:appinfo>
<intVal>8</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="dotRowPerHour">
<xsd:annotation>
<xsd:appinfo>
<intVal>9</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="feetPerHour">
<xsd:annotation>
<xsd:appinfo>
<intVal>16</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="metersPerHour">
<xsd:annotation>
<xsd:appinfo>
<intVal>17</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtInterpreterTwoWayTC">
<xsd:annotation>
<xsd:documentation>
Indicates whether or not this interpreter returns information
back to the host.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="yes">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="no">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="PrtAlertSeverityLevelTC">
<xsd:annotation>
<xsd:documentation>
The level of severity of this alert table entry. The printer
determines the severity level assigned to each entry in the
table. A critical alert is binary by nature and definition. A
warning is defined to be a non-critical alert. The original and
most common warning is unary. The binary warning was added later
and given a more distinguished name.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:NMTOKEN">
<xsd:enumeration value="other">
<xsd:annotation>
<xsd:appinfo>
<intVal>1</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="critical">
<xsd:annotation>
<xsd:appinfo>
<intVal>3</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="warning">
<xsd:annotation>
<xsd:appinfo>
<intVal>4</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="warningBinaryChangeEvent">
<xsd:annotation>
<xsd:appinfo>
<intVal>5</intVal>
</xsd:appinfo>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType>
</xsd:schema>