[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Control of host/server processing overload...



To my understanding, protocol just focusing on
interface between network nodes, TE focuses on
mechanism on common mechanism which follows by every
node to make full use of network resource.

So, application level load balancing should be dealt
by application level "TE mechanism" which may be
covered by CDN, p2p application and application level
routing. SIP may be a special example in application
level protocol which is cataloged into premium service
and it's load is not so heavy as that of data traffic.

Jing Shen


 --- martin.j.whitehead@bt.com 的正文:> Hello,
> 
> I am interested in understanding if the Internet
> Traffic Engineering Working Group has considered the
> following issue: control of processing overload of
> hosts/servers running protocols such as DNS, LDAP,
> SIP, HTTP, COPS, SNMP, Radius, and Diameter. 
> 
> My impression from a brief trawl is that, within the
> IETF, much thought has been, and is being, given to
> the management of bandwidth and router congestion,
> but almost none to control of host and server
> processing overload. Indeed, although some of the
> above listed protocols do provide response or status
> codes that might be used to indicate processing
> overload, I have found none which explicitly
> specifies an overload control mechanism.
> 
> The same conclusion also seems to apply to the
> following non-IETF protocols: H.323, SOAP, SAML,
> SMPP, and Parlay.
> 
> This contrasts with the telephony/ATM world where
> there are examples of protocols that have built-in
> overload control features: INAP, ISUP, BICC, PNNI
> and more recently H.248.11.  Such controls are
> crucial during extremes of network operation where
> surges of service requests (or Denial of Service
> attacks) can be an order of magnitude greater than
> normal demand levels. 
> 
> Please can you advise me of any work that is
> addressing this area.
> 
> Thanks in advance for your help
> 
> Martin Whitehead 
> BTexact
> Performance Engineering
> Critical Solutions Performance    
> Tel. 01473 605430      	Fax 01473 623
> BT MeetMe 0870 241 2993  Participant passcode 137305
> 
> PP 9, Floor 1 Orion Building, Adastral Park,
> Martlesham Heath. Ipswich,  Suffolk IP5 3RE
> 
> 	BTexact is a trademark of British
> Telecommunications plc
> 	Registered office: 81 Newgate Street London EC1A
> 7AJ
> 	Registered in England no. 1800000
> 
> This electronic message contains information from
> British Telecommunications plc which may be
> privileged or confidential. The information is
> intended to be for the use of the individual(s) or
> entity named above. If you are not the intended
> recipient be aware that any disclosure, copying,
> distribution or use of the contents of this
> information is prohibited. If you have received this
> electronic message in error, please notify us by
> telephone or email (to the numbers or address above)
> immediately.
> 
>  

_________________________________________________________
Do You Yahoo!? 
嫌邮箱太小?雅虎电邮自助扩容!
http://cn.rd.yahoo.com/mail_cn/tag/10m/*http://cn.mail.yahoo.com/event/10m.html