[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Packet Sampling in Cisco and Juniper Gears



Cisco Catalyst 9000 supports packet capture (not sampling).
This refers only to the packets that go to the supervisor board. Packets
that are routed directly from the network cards cannot be captured at this
time.

Cheers,

	fulvio

> -----Original Message-----
> From: owner-psamp@ops.ietf.org [mailto:owner-psamp@ops.ietf.org]On
> Behalf Of Stas Khirman
> Sent: mercoledi 5 maggio 2004 2.24
> To: psamp@ops.ietf.org
> Subject: Packet Sampling in Cisco and Juniper Gears
>
>
> Do Cisco and Juniper gears support some form of packet sampling? I had
> checked Juniper documentation and it mention packet sampling fro cFlowD
> (Netflow) and file dumping , but it is seen to deal only with L3/L4
> headers only. Does Cisco and/or Juniper support sFlow or something
> similar??
>
> Regards
> Stas
>
>
> --
> to unsubscribe send a message to psamp-request@ops.ietf.org with
> the word 'unsubscribe' in a single line as the message text body.
> archive: <http://ops.ietf.org/lists/psamp/>


--
to unsubscribe send a message to psamp-request@ops.ietf.org with
the word 'unsubscribe' in a single line as the message text body.
archive: <http://ops.ietf.org/lists/psamp/>