[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Plans for GELS work in CCAMP
Hi Adrian hi Deborah,
I think that this is a very good way to proceed I also think the people in the DT are the right ones.
I'd like to contribute this work so DT guys please fill free to contact me.
Best Regards
Diego
> -----Original Message-----
> From: owner-ccamp@ops.ietf.org [mailto:owner-ccamp@ops.ietf.org] On Behalf
> Of Adrian Farrel
> Sent: mercoledì 5 settembre 2007 11.51
> To: ccamp@ops.ietf.org
> Cc: Ross Callon
> Subject: Plans for GELS work in CCAMP
>
> Hi,
>
> We owe you a plan for starting the GELS work in CCAMP.
>
> As you may have seen, we have just sent a request to the ADs to push
> through
> our recharter as discussed on the mailing list. The ADs have already
> indicated their support, so hopefully this will be fairly smooth.
>
> We have also been talking with Don and Loa about starting work on the GELS
> drafts that we will accept into the working group as a starting point.
> (Other drafts can be added as needed.)
>
> 1. "GMPLS Extensions for PE to PE Ethernet Label Switched Paths(LSPs)"
> This document is the generic work:
> - Introduction
> - Rationale for GMPLS Control of Ethernet
> - Generic functional requirements (no data plane specifics!)
> - Applicability of existing protocol elements
> - New generic protocol elements (nothing specific to the data plane)
>
> 2. "GMPLS control of P2P TE for PBB-TE (802.1Qay)"
> Mainly references to the generic document.
> Some protocol specifics:
> - Code points (i.e. IANA section)
> - Label allocation and swapping rules
> Not a large document.
>
> Other drafts that we might also see:
>
> 3. "GMPLS control of P2P TE for IEEE802.1Q"
> Another data plane-specific draft, like 2, but for a different data plane
>
> 4. Applicability Statement
> A concise description of how and why to apply GMPLS to Ethernet.
> Probably not written until after the protocol work is done.
>
> We propose a relatively small design team to get this work started.
> Loa Andersson
> Lou Berger
> Don Fedyk
> George Swallow
>
> We are NOT trying to exclude anyone from the work, and we make a couple of
> observations:
>
> - A design team is just a group of people working on a
> draft.
> - Anyone and everyone is welcome to write a draft.
> - We feel that an initial design should be small to make
> rapid initial progress.
> - We welcome (and expect!) full and detailed contribution
> on the mailing list as this work progresses.
> - Everyone who contributes to a draft should be appropriately
> recognised in the draft.
>
> Last point:
> I propose to close the GELS mailing list now.
>
> Hope this is all satisfactory to you.
>
> Regards,
> Adrian and Deborah
>
>