[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: WG Last Call:draft-ietf-ccamp-inter-domain-pd-path-comp-04.txt
This ends the WG Last Call. We'll forward it on to the IESG.
Thanks,
Deborah
-----Original Message-----
From: owner-ccamp@ops.ietf.org [mailto:owner-ccamp@ops.ietf.org] On
Behalf Of BRUNGARD, DEBORAH A, ATTLABS
Sent: Monday, March 05, 2007 3:19 PM
To: ccamp@ops.ietf.org
Subject: WG Last Call:draft-ietf-ccamp-inter-domain-pd-path-comp-04.txt
Hi,
This is the start of the WG Last Call for this document. In
consideration of the meeting week, we will extend the Last Call until
March 30th. Please email the authors and the list with any comments,
concerns, or corrections.
Thanks,
Deborah and Adrian
-----Original Message-----
From: owner-ccamp@ops.ietf.org [mailto:owner-ccamp@ops.ietf.org] On
Behalf Of Internet-Drafts@ietf.org
Sent: Tuesday, February 20, 2007 3:50 PM
To: i-d-announce@ietf.org
Cc: ccamp@ops.ietf.org
Subject: I-D ACTION:draft-ietf-ccamp-inter-domain-pd-path-comp-04.txt
A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the Common Control and Measurement Plane
Working Group of the IETF.
Title : A Per-domain path computation method for
establishing Inter-domain Traffic
Engineering (TE) Label Switched Paths (LSPs)
Author(s) : J. Vasseur, et al.
Filename :
draft-ietf-ccamp-inter-domain-pd-path-comp-04.txt
Pages : 21
Date : 2007-2-20
This document specifies a per-domain path computation technique for
establishing inter-domain Traffic Engineering (TE) Multiprotocol
Label Switching (MPLS) and Generalized MPLS (GMPLS) Label Switched
Paths (LSPs). In this document a domain refers to a collection of
network elements within a common sphere of address management or path
computational responsibility such as IGP areas and Autonomous
Systems. Per-domain computation applies where the full path of an
inter-domain TE LSP cannot be or is not determined at the ingress
node of the TE LSP, and is not signaled across domain boundaries.
This is most likely to arise owing to TE visibility limitations. The
signaling message indicates the destination and nodes up to the next
domain boundary. It may also indicate further domain boundaries or
domain identifiers. The path through each domain, possibly including
the choice of exit point from the domain, must be determined within
the domain.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ccamp-inter-domain-pd-pat
h-comp-04.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
"get draft-ietf-ccamp-inter-domain-pd-path-comp-04.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE
/internet-drafts/draft-ietf-ccamp-inter-domain-pd-path-comp-04.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail
readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.