[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Two questions on draft-dimitri-ccamp-gmpls-ason-routing-ospf draft
igor,
> Is the LinkID is the same as Remote TE Router ID?
no
> LinkID unambiguosly identifies remote data plane node,
no, it identifies the remote RC not the remote data plane "node" in case
the remote RC is associate to n "nodes"
ps: second question is trivial, mathematical vs networking formulation (no
real difference)
pps: if you want to put guidelines on e-mail responses probably directing
your e-mail to the GEN AREA would be more suitable
hope this helps,
-d.
Igor Bryskin <i_bryskin@yahoo.com>
09/03/2007 00:03
To: Dimitri PAPADIMITRIOU/BE/ALCATEL@ALCATEL
cc: ccamp@ops.ietf.org, "Brungard, Deborah A, ALABS"
<dbrungard@att.com>
Subject: Re: Two questions on
draft-dimitri-ccamp-gmpls-ason-routing-ospf draft
Dimitri, no, it does not help.
You didn't answer the first question, which is:
Is the LinkID is the same as Remote TE Router ID? If no, what is the
difference? If yes, why do you need the latter? Both your pointers explain
why do you need advertising of the local TE Router ID (advertising router
may cover multiple data plane nodes), However, LinkID unambiguosly
identifies remote data plane node, and the need for the advertising of
Remote TE Router ID is not obvious
BTW, You didn't answer the second question either.
Igor
PS, I have a suggestion for the working group: Let us disallow responding
to the comments/questions by just pointing to RFCs or drafts. In my view
it is quite unfriendly. It is always possible to cut and paste a piece
from the relevant RFC or draft confirming the points the writer is trying
to make.
Dimitri.Papadimitriou@alcatel-lucent.be wrote:
igor
pls use version (or 03
when available to make comments)
in that version you will see in Section 5.2
" Note: The Link ID sub-TLV that identifies the other end of the link
(i.e. Router ID of the neighbor for point-to-point links) MUST
appear exactly once per Link TLV. This sub-TLV MUST be processed as
defined in [RFC3630]. "
now why this sub-TLV 17, well for the reason explained at the beginning of
par.5.2
but also in RFC 4652 Section 5.7
hope this helps,
-d.
Igor Bryskin
08/03/2007 22:11
To: Dimitri PAPADIMITRIOU/BE/ALCATEL@ALCATEL
cc: ccamp@ops.ietf.org, "Brungard, Deborah A, ALABS"
Subject: Two questions on
draft-dimitri-ccamp-gmpls-ason-routing-ospf draft
Dimitri,
I have a couple questions wrt the
draft-dimitri-ccamp-gmpls-ason-routing-ospf draft.
In 5.2 a TE Link sub-TLV is introduced for the purpose of advertising
local and remote TE Router ID:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 17 | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Local TE Router Identifier |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Remote TE Router Identifier |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Although I do understand why there is a need for advertising the Local TE
Router ID, I don’t understand why the Remote Te Router ID? Isn’t
this is
the same
information
that is carried in the Link ID sub-TLV?
In 6. you write:
“A RA may contain smaller RAs inter-connected by links.
The limit of the subdivision results in
a RA that contains two sub-networks interconnected by a single link.â€
In G.8080 I read:
“.... A routing area is defined by a set of subnetworks, the SNPP links
that interconnect them, and the SNPPs representing the ends of the SNPP
links exiting that routing area. A routing area may contain smaller
routing areas interconnected by SNPP links. The limit of subdivision
results in a routing area that contains ]one subnetwork.â€
Why is the discrepancy?
Thanks,
Igor
[
Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.
Now that's room service! Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.