[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Common Control and Measurement Plane Working Group of the IETF.
Title : OSPF Extensions in Support of Inter-AS Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) Traffic Engineering
Author(s) : M. Chen, et al.
Filename : draft-ietf-ccamp-ospf-interas-te-extension-02.txt
Pages : 18
Date : 2007-11-19
This document describes extensions to the OSPF version 2 and 3
protocols to support Multiprotocol Label Switching (MPLS) and
Generalized MPLS (GMPLS) Traffic Engineering(TE) for multiple
Autonomous Systems (ASes). OSPF-TE v2 and v3 extensions are defined
for the flooding of TE information about inter-AS links which can be
used to perform inter-AS TE path computation.
No support for flooding TE information from other outside the AS is
proposed or defined in this document.
Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC-2119 [RFC2119].
A URL for this Internet-Draft is:
To remove yourself from the I-D Announcement list, send a message to
firstname.lastname@example.org with the word unsubscribe in the body of
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
A list of Internet-Drafts directories can be found in
Internet-Drafts can also be obtained by e-mail.
Send a message to:
In the body type:
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the