[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
A New Internet-Draft is available from the on-line Internet-Drafts
This draft is a work item of the Common Control and Measurement Plane Working Group of the IETF.
Title : Procedures for Dynamically Signaled Hierarchical Label Switched Paths
Author(s) : K. Shiomoto, et al.
Filename : draft-ietf-ccamp-lsp-hierarchy-bis-02.txt
Pages : 19
Date : 2007-5-8
This document discusses topics related to hierarchical and stitched
Generalized Multiprotocol Label Switching (GMPLS) Label Switched
Paths (LSPs). It describes extensions to allow an egress to identify
that a bi-directional LSP will be used as a dynamically signaled
Forwarding Adjacency LSP (FA-LSP) or as a Routing Adjacency (RA). In
addition, the document also discusses the issue of how to indicate
that an LSP should be advertised as a traffic engineering (TE) link
into a different instance of the IGP, and how to identify the
instance that should be used.
A URL for this Internet-Draft is:
To remove yourself from the I-D Announcement list, send a message to
firstname.lastname@example.org with the word unsubscribe in the body of
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
A list of Internet-Drafts directories can be found in
Internet-Drafts can also be obtained by e-mail.
Send a message to:
In the body type:
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the