[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
A New Internet-Draft is available from the on-line Internet-Drafts
This draft is a work item of the Common Control and Measurement Plane Working Group of the IETF.
Title : Use of Addresses in Generalized Multi-Protocol Label Switching (GMPLS) Networks
Author(s) : K. Shiomoto, et al.
Filename : draft-ietf-ccamp-gmpls-addressing-06.txt
Pages : 21
Date : 2007-4-18
This document clarifies the use of addresses in Generalized
Multi-Protocol Label Switching (GMPLS) networks. The aim is to
facilitate better interworking of GMPLS-capable Label Switching
Routers (LSRs). The document is based on experience gained in
implementation, interoperability testing, and deployment.
The document describes how to interpret address and identifier fields
within GMPLS protocols, and how to choose which addresses to set in
those fields for specific control plane usage models. It also
discusses how to handle IPv6 sources and destinations in the MPLS and
GMPLS Traffic Engineering (TE) Management Information Base (MIB)
This document does not define new procedures of processes.
A URL for this Internet-Draft is:
To remove yourself from the I-D Announcement list, send a message to
firstname.lastname@example.org with the word unsubscribe in the body of
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
A list of Internet-Drafts directories can be found in
Internet-Drafts can also be obtained by e-mail.
Send a message to:
In the body type:
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the