[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Common Control and Measurement Plane Working Group of the IETF.
Title : Routing extensions for discovery of
Multiprotocol (MPLS) Label Switch Router (LSR)
Traffic Engineering (TE) mesh membership
Author(s) : J. Vasseur, J. Le Roux
Filename : draft-ietf-ccamp-automesh-00.txt
Pages : 10
Date : 2005-11-28
The set up of a full mesh of MPLS TE LSPs among a set of Label Switch
Router (LSR) is common deployment scenario of MPLS Traffic
Engineering either for bandwidth optimization, bandwidth guarantees
or fast rerouting with MPLS Fast Reroute. Such deployment requires
the configuration of potentially a large number of TE LSPs (on the
order of the square of the number LSRs). This document specifies IGP
(OSPF and IS-IS) traffic engineering extensions so as to provide an
automatic discovery of the set of LSRs members of a mesh, leading to
an automatic mechanism to set up TE LSP mesh(es) (also referred to as
a mesh-group in this document).
A URL for this Internet-Draft is:
To remove yourself from the I-D Announcement list, send a message to
firstname.lastname@example.org with the word unsubscribe in the body of the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
A list of Internet-Drafts directories can be found in
Internet-Drafts can also be obtained by e-mail.
Send a message to:
In the body type:
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the